5 레벨 티타늄 무봉관

Product Name：Gr5 Titanium Alloy Seamless Tube
Grade:Gr5
Standard:ASTM B338/ASTM B861
Technique:Forging Rolling
Melting point range:1650°C
Operating temperature: -100 ~ 550 (℃)
Appliation:Chemical heat exchanger
Certification:ISO, EN10204 3.1, EN10204 3.2

Application and usage standards

1. Titanium tubes are widely used in shell and plate heat Exchangers, one is U- tube Heat exchangers, another is straight tube heat exchangers.

2. Controlling by TEMA, corrosion allowances, testing requirement min. thickness, to design and manufacture efficient solutions are arrived at.

3. U-Tube Heat exchangers make use of U-shaped tubes fixed, while the straight tubes are getting supported through a set of straight tubes.

4. Except for it, a lot of factors should be taken into consideration, such as the thickness of the wall, eccentricity, length, and the dimensional tolerances for diameter. All of them should be considered.

5. We had finished many projects about titanium tubes of shell and plate heat exchanger in the worldwide, welcome to discuss more knowledge about titanium tubes.

Gr5 Titanium Seamless Tube
Gr5 Titanium alloy seamless tube is a kind of made of titanium alloy materials with hollow section, the peripheral without seam strip type of tubing.

Titanium and titanium alloy pipe is a new type of structural materials, because titanium has a high melting point, small specific gravity, high specific strength, good toughness, fatigue resistance, acid and alkali corrosion resistance, low thermal conductivity, high and low temperature tolerance can be good, in the rapid heat and cold conditions under the stress of small.

Ti 6AL 4V Thermal Expansion Coefficient
Gr5 titanium alloy has excellent corrosion resistance, small density, high specific strength, good toughness and weldability and a series of advantages, in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other departments have been successfully used.

Gr5 Strength At Room Temperature
Maximum tensile strength: 1380-2070mpa (200-300kSI)

Compression yield strength: 825-895mpa (120-130ksi)

Maximum shear strength: 480-690mpa (70-100ksi)

Machining performance with temperature increase: the higher the temperature, the lower the strength.

Application Of Gr5 Titanium Seamless Pipe
Gr5 Titanium Pipe widely applied in heat exchange equipment, such as shell and tube heat exchanger, coil heat exchanger, coil heat exchanger, condenser, evaporator and pipelines, etc.